Tripod Adapters for all Poles (F7304V)

$59.95

Availability: Out of stock

Type A: This tripod adapter works with tripods that have a 3/8” male thread on top and a 3/8” male or female thread at the bottom of the center column. This adapter is cheaper and supports all sizes of the center column. The adapter spreads the bending torque over the length of the center column, greatly reducing the torque at the tripod top disk, rotator and pole base. It works with Fanotec advanced rotators, pole rotator, and Fanotec poles.

Type B 32mm
This tripod adapter works with tripods that have a top disk with 3/8” thread, and a center column with a diameter of 32mm, 28mm, 26mm or 25mm. This adapter is more expensive and supports few sizes of the center column. Tripod with 25mm or 26mm center column is only recommended for application below 3m. For application above 3m, tripod with a 28mm center column or bigger is recommended. The adapter spreads the bending torque over the length of the center column, greatly reducing the torque at the tripod top disk, rotator and pole base. It works with Fanotec advanced rotators, pole rotator, and Fanotec poles.

Type B 37mm:
This tripod adapter works with rare tripods that have a top disk with 3/8” thread, and a center column with a diameter of 37. No other column sizes are supported. The adapter spreads the bending torque over the length of the center column, greatly reducing the torque at the tripod top disk, rotator and pole base. It works with Fanotec advanced rotators, pole rotator, and Fanotec poles.

Long Adapter
The longer adapter works with heavy duty tripod having a shoulder plate radius greater than 54mm / 2.1”. eg Manfrotto 058B tripod.

High-end tripods for photography are strong enough to support a 6m pole. Some people even attempt to install a rotator and pole directly onto the tripod. This is very dangerous. Rotators and tripod center columns are designed to withstand vertical loading with minimal bending torque. With a long pole, the torque is increased 15 times or more. This can cause damage, without noticeable warning, to the tripod center column top disk, rotator and pole base and to the gears on top of the pole. Damage to equipment and potential injury to people in the area should be avoided at all costs. As part of the pole systems, Fanotec has developed these low cost, lightweight and safe to use, tripod adapters for use with Fanotec rotators and poles.

images may vary from actual product

To Fit Tripod To Fit Pole Complete Set NN SKU
Standard tripod with shoulder plate radius smaller than 48mm (1.89″).
Travel Pole
Tripod Adapter for Travel Pole Upper + Lower Type B F7306*
– Tripod Adapter for Travel Pole Upper (Dia 24, D60) F7307
– Tripod Adapter for Travel Pole Lower Type B (Dia 32, D60) F7308
Standard tripod with shoulder plate radius smaller than 54mm (2.1″).
Pole 1/2
Tripod Adapter for Pole 1/2 Upper + Lower Type A F7310
– Tripod Adapter for Pole 1/2 Upper (Dia 43.5, D75) F7311
– Tripod Adapter for Pole 1/2/3 Lower Type A (D75) F7312
Tripod Adapter for Pole 1/2 Upper + Lower Type B 32mm F7316*
– Tripod Adapter for Pole 1/2 Upper (Dia 43.5, D75) F7311
– Tripod Adapter for Pole 1/2/3 Lower Type B 32mm (Dia 32, D75) F7318
Tripod Adapter for Pole 1/2 Upper + Lower Type B 37mm F7319
– Tripod Adapter for Pole 1/2 Upper (Dia 43.5, D75) F7311
– Tripod Adapter for Pole 1/2/3 Lower Type B 37mm (Dia 37, D75) F7321
Heavy duty tripod with shoulder plate radius greater than 54mm (2.1″).
Pole 1/2
Tripod Adapter for Pole 1/2 Long Upper + Lower Type A F7313
– Tripod Adapter for Pole 1/2 Long Upper (Dia 43.5, D105) F7314
– Tripod Adapter for Pole 1/2/3 Long Lower Type A (D105) F7315
Tripod Adapter for Pole 1/2 Long Upper + Lower Type B 32mm  
– Tripod Adapter for Pole 1/2 Upper (Dia 43.5, D105)  
– Tripod Adapter for Pole 1/2/3Lower Type B 32mm (Dia 32, D105)  
Tripod Adapter for Pole 1/2 Long Upper + Lower Type B 37mm  
– Tripod Adapter for Pole 1/2 Upper (Dia 43.5, D105)  
– Tripod Adapter for Pole 1/2/3 Lower Type B 37mm (Dia 37, D105)  
Standard tripod with shoulder plate radius smaller than 54mm (2.1″).
Pole 3
Tripod Adapter for Pole 3 Upper + Lower Type A F7322*
– Tripod Adapter for Pole 3 Upper (Dia 48.5, D75) F7323
– Tripod Adapter for Pole 1/2/3 Lower Type A (D75) F7312
Tripod Adapter for Pole 3 Upper + Lower Type B 32mm F7328
– Tripod Adapter for Pole 3 Upper (Dia 48.5, D75) F7323
– Tripod Adapter for Pole 1/2/3Lower Type B 32mm (Dia 32, D75) F7318
Tripod Adapter for Pole 3 Upper + Lower Type B 37mm F7331
– Tripod Adapter for Pole 3 Upper (Dia 48.5, D75) F7323
– Tripod Adapter for Pole 1/2/3 Lower Type B 37mm (Dia 37, D75) F7321
Heavy duty tripod with shoulder plate radius greater than 54mm (2.1″).
Pole 3
Tripod Adapter for Pole 3 Long Upper + Lower Type A F7325
– Tripod Adapter for Pole 3 Long Upper (Dia 48.5, D105) F7326
– Tripod Adapter for Pole 1/2/3 Long Lower Type A (D105) F7315
Tripod Adapter for Pole 3 Long Upper + Lower Type B 32mm  
– Tripod Adapter for Pole 3 Long Upper (Dia 48.5, D105) F7326
– Tripod Adapter for Pole 1/2/3 Long Lower Type B 32mm (Dia 32, D105)  
Tripod Adapter for Pole 3 Long Upper + Lower Type B 37mm  
– Tripod Adapter for Pole 3 Long Upper (Dia 48.5, D105) F7326
– Tripod Adapter for Pole Long 1/2/3 Lower Type B 37mm (Dia 37, D105) F7340

* Most Popular

Weight 2 lbs
Dimensions 4 × 6 × 2 in

Brand

Nodal Ninja

Panoramic Hardware, Poles and Accessories
Back to top
X